7 Inch HDMI Capacitive LCD Display with IPS Touch Screen Monitor 800*480 for Raspberry Pi 3B/ Pi 2B/ B+/ Banana Pi
800×480 high resolution
Capacitive touch control
Supports popular mini-PCs like Raspberry Pi, BB Black, etc.
Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen
Backlight can be turned off to lower power consumption
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable
Working with PC
This LCD supports Windows7/8/8.1/10
1.Turn on the backlight switch on the backside of LCD
2.Connect Touch interface of LCD to one of USB port of PC
3.Connect HDMI interface of HDMI port of PC
Note:Some of the PC cannot support hot-plug,and the LCD cannot display,in this case,you need to restart your computer.
Working with Raspberry Pi
When using the LCD with Raspberry Pi,you need to configure the resolution manually,otherwise,the LCD cannot display properly.
1.Download latest raspbian from Raspberry Pi Website and write it to the SD card.
2.Modify config.txt files which is in root of SD card,append these lines to the end of config,txt file as below:
hdmi_cvt 800 480 60 6 0 0 0
3.Save and inset the SD card to your SD card to your Raspberry Pi
4.Open the backlight switch of the backlight of Pi
5.Connect Touch interface of LCD to USB port of Raspberry Pi
6.Connect HDMI interface of LCD to HDMI port of Rspberry Pi
Note:For Ubuntu Mate ,the setting method is same as Raspbian
7inch HDMI LCD (B) x 1
HDMI cable x 1
HDMI to Micro HDMI Adapter x 1
USB type A plug to micro B plug cable x 1
RPi screws pack (4pcs) x 1