AD8307 module RF Power Detector Module Logarithmic detector Transmitter Antenna Power to 500MHz Function demo board
AD8307 module RF Power Detector Module Logarithmic detector Transmitter Antenna Power to 500MHz Function demo board image 1

AD8307 module RF Power Detector Module Logarithmic detector Transmitter Antenna Power to 500MHz Function demo board

US $16.24 -20%

US $13.53

 

Highlights:

AD8307 is a multistage logarithmic amplifier with a dynamic range of 92 dB (-75 dBm + 17 edBm) and a frequency of less than 500 MHz. Low power consumption, 3 V power consumption is only 225 mW. It can be widely used in high frequency communication and instrumentation systems which need accurate measurement of signal power.

 

 

AD8307 module shipping list:

 

Physical module + PDF schematic diagram + after-sale technical support + electrostatic bag packaging + shockproof foam

Tips:

(1) The module interface of our shop is clear and the function is simple. Please combine the schematic diagram provided by our shop and the reference experimental conditions to do the corresponding function verification.

(2) Details of the basic parameters of this module are in the details, only a schematic diagram in PDF format is provided; no engineering documents are provided, please be clear to the buyer, if there are operational problems, you can consult customer service.

(3) Before buyers use the module, please read the details page of this module to understand the power supply and use restrictions to avoid damage to the module due to improper operation.

(4) Our modules are guaranteed to provide real module parameters, functions and pictures, and all modules will be shipped after detection.

Please contact customer service after purchase, we will send the information to your mailbox

 

Module parameters

 

Module model: AD8307

Module type: RF logarithmic detector

Module supply voltage: DC5V

Module supply current: 9mA

Input signal form: single-ended

Input voltage range: -75dBm-+ 17dBm

Input frequency range: 20Hz-500MHz

Input impedance: 50 ohms

Output voltage range: 0.2V-2.5V; subject to actual measurement, there are differences between different modules

Input signal characteristics: input coupling; can be continuous sine wave or pulse. The circuit needs to be modified for pulse measurement. The module defaults to continuous mean detection.

Output current: 2mA (max); the output is a voltage signal, generally without current.

Module dynamic range: better than 90dB

Module weight: 8.3g

Module protection: none; no reverse connection protection, unlimited current protection

Module weight: 8.3g

Module specifications: 37 * 24 * 13mm length * width * height-PCB size

Module shield: no shield cover

Module heating factors: excessive power supply voltage damages the chip or the module is damaged

Module working temperature: -40 ℃-+ 85 ℃; industrial grade

Module features: highly stable regulation at different temperatures, complete multistage logarithmic amplifier, fully differential DC coupled signal path

Applications: Transmitter power measurement, receiver strength measurement, transmitter antenna power measurement, signal level to decibel conversion, etc.

Module interface type: SMA signal input and output, 3.81-2PIN power base

 

Module description

 

AD8307 is the first logarithmic amplifier. It is a 500MHz complete single-chip demodulation logarithmic amplifier that uses progressive compression (continuous detection) technology. It can provide 92dB (± 3dB rule consistency) and 88dB at frequencies up to 100MHz. ± 1dB tight error limit) dynamic range. The CMOS-compatible fast execution control pin can disable the standby current of the AD8307 to 150μA. The dynamic range extends from approximately -75 dBm (where dBm refers to a 50Ω source, ie the amplitude of the sine wave is approximately 50. ± 56μV) to + 17dBm (sinusoidal amplitude ± 2.2V). A simple input matching network can reduce this range to -88dBm to + 3dBm. In the central part of this range, the logarithmic linearity is usually between ± 0.3dB and 100MHz, with only a slight decrease at 500MHz.

   There is no minimum frequency limit for AD8307, and the minimum audio frequency can reach 20Hz or lower. Can be used for transmitter power measurement, receiver strength measurement, transmitter antenna power measurement, signal level to decibel conversion, etc.

 

Features:

*Complete multistage logarithmic amplifier
 
*92 dB dynamic range: - 75 dBm to + 17 dBm,
 
*Using matching network can achieve -90dBm
 
*Single supply voltage: minimum 2.7, supply current: 7.5mA (typical value)
 
*Working frequency: DC to 500MHz, linearity: ±1dB
 
*Slope: 25mV/dB, cut-off: -84dBm
 
*High stability in the whole temperature range
 
*Complete Differential DC Coupled Signal Path
 
*Power-on time: 100ns, standby current: 150μA
 
 
Details:
 
Current of150uA.AD8307 is the first logarithmic amplifier. It uses 8-pin SIC_N sealing technology. It is a 500MHz single-chip demodulation logarithmic amplifier with progressive compression (continuous detection) technology. It can provide 92dB (,+3dB rule consistency) 88dB (+1dB tight error limit) dynamic range when the frequency is up to 100MHz.
 
AD8307 is extremely stable and easy to use, basically without external components. It operates at 2.7V to 5.5V single supply voltage (7.5mA). CMOS-compatible Quick Execution Control Pin Disables AD8307 Current to 150 UA
 
The working flexion range of pAAD8307 is -40°C  to +85°C "industrial degree range, which is packaged with 8-pin SOlC and 8-pin PDIP.
 
 
smt详情4-接口图smt详情5-尺寸图

Precautions for using the module

 

(1) The maximum input power of the detector module is + 17dBm, and the dynamic range is 92dB. There are actual measurements to see that nonlinearities begin to appear when they exceed -10dBm.

(2) There is no reverse connection of the module, and there is no current limiting protection; when using the module, be careful not to reverse the connection, otherwise it will easily damage the chip or module.

(3) The module is a low-power module, and the power supply does not exceed 5.5V.

(4) Since the module is a high-precision device, in order to avoid unnecessary interference, it is recommended to use a linear power supply.

(5) It is recommended to use the SMA interface for the input signal. Poor contact or poor quality wires may cause signal attenuation or excessive noise, making the measurement inaccurate.

(6) The response and dynamic range of the detector module at different frequencies will be different, and there are differences between different modules, which is normal and not a problem of the module

 
smt详情7-测试图

Frequently asked questions

 

Q: Is there no response when measuring pulse power? The output is a straight line.

A: The default function of the module is power detection. It cannot detect pulse or instantaneous power. You need to change the C4 capacitor to a small capacitor value to detect pulse and instantaneous power. Generally, the higher the instantaneous requirements, the C4 capacitor can be removed.

Q: I bought two modules. Is the output voltage different under the same test condition? Is it normal?

A: There are individual differences between the modules. The actual measured details are typical data, and the specific parameters have been measured.

Q: What is the use of the matching network entered?

A: The AD8307 is compatible with a detection frequency of 500MHz. The input impedance required at different frequencies is different. The default parameters are compatible with most frequencies.

 

smt详情9-芯片简介

分割
 

About Elecdemo:

Elecdemonded in 2015 , Elecdemo is a well-established technology company that integrates supply , R & D , prodund sales , supporting agents , franchises , customization and bulk purchases . We are committed to provid our customers with the best electronic functional module products at the lowest price . We have a professional design and production team to providecustomer service to help our customers greatly improve the efficiency of development,learn and research.

 

About Transpiration:

1. Global shipping, (except for some countriesand APO/ FPO)

2. Import duties: Taxes are not included in theprice or shipping costs. Customs fees are the responsibility of the buyer.

3. If the package is not delivered within 30 days. please contact us. We will help you solve the problem.

 

About Delivery:

1. We will process the order in time after the payment is confirmed. Due to the difference in inventory status and time, we will choose to ship from our first warehouse for fast delivery.

2. We only send to the confirmed order address. Your order address must match your shipping address.

3.Service transit time is provided by the carrier, excluding weekends and holidays. Delivery time may vary, especially on holidays.

 

About Guarantee:

1.  manufacturers limited warrantyon defective items(excluding items damagedand/or misused after receipt). The accessory is backed by a 3 month warranty

2. The displayed image is taken in real time, but due to different production batches, thecolor may be different. The picture is for reference only, and the actual object is subjectto the final one

3. The defective item must be reported and reurned within the warranty period(if possible,in the original packaging

4. If the product features do not match the advertisement, we will bear all shipping costs.

 

About Feedback:

1. If you are satisfied, please leave 5 stars positive feedback, we are very honored to receivea generous real assessment and photos, th !!!!

2. For any product or shipping problems, please contact us before opening a dispute orleaving any feedback/negative feedback, we will try our best to solve the problem untilyou are satisfied.

 

Returns and Refunds:

1. You have 7 days to contact us and you will not be able to return from the receipt date after30 days. If the item has been owned by you for more than 7 days, it will be considered usedand we will not refund or replace it. with no exceptions! Return shipping costs are theresponsibility of the buver.

2. All returned items must be in original packaging, you must provide us with a shippingtracking number.

3. If there is a return, please contact us in advance, we will help you solve it. If it cannot besolved online, we will accept your return and refund it to you.

 
 
 
 
 

Reviews

2020-08-10 15:07:00

2020-06-25 21:11:00