ESP8266 Nodemcu ESP-12S A9G IOT Node V1.0 Module IOT Development Board with All in One WiFi with GSM GPRS GPS Antenna
US $26.75 -21%
ESP8266 ESP-12S A9G GSM GPRS+GPS IOT Node
WiFi+Cellular + GPS tracking, all in one? Oh yes! Introducing ESP-12S A9G GSM GPRS+GPS IOT Node, an all-in-one cellular phone module with WiFi module with that lets you add location-tracking, text, SMS and data to your project. This IOT node has both WiFi and GPRS support. That means it's perfect for just about any wireless or Internet-connected project. This is the ESP-12S A9G GSM GPRS+GPS IOT Node, which based on the ESP-12S and the cellular phone module A9G. TWO modules all are come from Ai-thinker. With built in USB and battery charging, it is a really IOT development board. It is very useful on your IOT project. At the IOT Node's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a CH340C USB-Serial chip that can upload code at a blistering 921600 baud for fast development time. It also has auto-reset so no noodling with pins and reset button pressings. The A9G can be used in a wide range of IoT applications and is ideal for IoT applications for home automation, industrial wireless control, wearable electronics, wireless location sensing devices, wireless location system signals and other IoT applications.
--ESP8266 @ 80MHz with 3.3V logic/power --4MB of FLASH (32 MBit) --Built in WiFi 802.11 b/g/n --3.3V regulator with 500mA peak current output --Auto-reset support for getting into bootload mode before firmware upload --4 x GPIO pins - can also be used as I2C --1 x analog inputs 3.3V max --Built in 500mA LiPoly charger with charging status indicator LED --Reset button
--Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM --Fully-integrated GPS --Send and receive SMS messages --Send and receive GPRS data (TCP/IP, HTTP, etc.) --Support standard GSM07.07, 07.05 --AT commands and Ai-Thinker extended commands --Support GPS, BD --Nano SIM Card holder
1. SIM Card! A 2G Nano SIM card is required to do anything on the cellular network. US AT&T no longer sells 2G SIMs and will shut off their 2G network, so for American customers we recommend any T-Mobile or reseller (TING, SIMPLE mobile, etc) that uses the T-Mobile network. 2. We added a connector for 3.7V Lithium polymer batteries and built in battery charging. A 500mAh+ Lipoly battery is required for use, it keeps the cellular module happy during the high current spikes. Plug the IOT Node into microUSB to charge at 500mA. 3. User Manual: https://github.com/IOT-MCU/ESP-12S-A9-A9G-GPRS-Node-v1.0/wiki
-- 1x ESP-12S A9G GSM GPRS+GPS IOT Node -- 1x GSM Antenna -- 1x Active GPS Antenna
1. Since your feedback is very important to our business`s development, we sincerely invite you to leave positive feedback and 5 stars for us if you are satisfied with our product and service. 2. For any reasons, you are not satisfied with the items or services, please feel free to contact us first before you leave negative feedback. We will do our best to solve the problems and provide you with the best customer servcies.
Warranty & Return
1. We do our best to serve our each customer the best that we can do. 2. We will refund you for items returned within 7 days of you receiving them, for any reason. A full refund will be given if items are returned in their original condition. 3. We provide 1 month replacement and 12 months maintenance warranties. Items be replaced during the first month or maintained for the first year. 4. Before returning items, please contact with us and make sure you get our (the seller's) return address
1. We support world wide shipping with tracking number(Registered airmail) and express(DHL/FEDEX/UPS/EMS). 2. Shipping cost: Click "Shipping and payment" tab on the product detail page, and you will see the delivery details. You can calculate shipping cost by inputting the required information. 3. Time in transit: Transit time varies with different shipping methods. Carrier Name Estimated Time in Transit from China to Destination Tracking Service 1 3-5 business days www.dhl.com 2. 3-5 business day www.fedex.com 3. 3-5 business days www.ups.com 4. 5-10 days www.ems.com.cn 5. 7-25 dayswww.hongkongpost.com 4. Order Processing Time: Orders will be processed within 1-2 business days after payment is cleared.
Technical support is to help suggest products to purchase and ensure that those products are working as expected.
Elecrow is an open hardware facilitation company based in Shenzhen, China. Benefiting from the largest electronic market, local manufacture power and convenient global logistic system, a vast number of funny and exciting products are created every day. We integrate resources to serve new era of innovation. To make your making and innovation easier, we offer various development platform, modules, tools, electronics components,and other open source hardware. we also provide many kinds of service ,include Fusion PCB service, Component Sourcing service and PCB Assembly service etc. No matter whether you're a curious student, a qualified engineer, or a hobbyist who loves to create, there will always be something here to meet your needs and if there isn't ,we'd love to know. please Feel free to contact with us.