Fisheyes Raspberry Pi 3 Model B+ Plus Camera 160 Degree 5MP Night Vision Camera + Infrared Light Wide Angle RPI Camera
Fisheyes Raspberry Pi 3 Model B+ Plus Camera 160 Degree 5MP Night Vision Camera + Infrared Light Wide Angle RPI Camera image 1
Fisheyes Raspberry Pi 3 Model B+ Plus Camera 160 Degree 5MP Night Vision Camera + Infrared Light Wide Angle RPI Camera image 2
Fisheyes Raspberry Pi 3 Model B+ Plus Camera 160 Degree 5MP Night Vision Camera + Infrared Light Wide Angle RPI Camera image 3
Fisheyes Raspberry Pi 3 Model B+ Plus Camera 160 Degree 5MP Night Vision Camera + Infrared Light Wide Angle RPI Camera image 4
Fisheyes Raspberry Pi 3 Model B+ Plus Camera 160 Degree 5MP Night Vision Camera + Infrared Light Wide Angle RPI Camera image 5

Fisheyes Raspberry Pi 3 Model B+ Plus Camera 160 Degree 5MP Night Vision Camera + Infrared Light Wide Angle RPI Camera

US $17

160 Degree Fisheyes Raspberry Pi 3 Model B+ Plus Camera 5MP Night Vision Camera + Infrared Light Lamp Wide Angle RPI Camera

160-7_

 

Introduction :

This is the new camera for Raspberry Pi for the peopel need more wide angle. It is night vision , focal adjustable camera.We provide up to 160 degree fisheyes lens .

 

Feature :

1. Fish eye wide angle lens , up to 160 degree.

2. Night vision camera

3. 5 MP pixel

4. Focal adjustable

 

 

Specifications :

1. 5 megapixel OV5647 sensor

2. CCD size : 1/4inch

3. Sensor best resolution : 1080p

4. 4 screw holes: used for attachment IR lights , and for 3.3V electric conduction

5. Focal Length : 2.1

6. Diagonal angle :  160 degree

7. Dimension: 25mm x 24mm

 

How to use Raspberry Pi Camera

1. Install Raspbian system into SD card and insert to Raspberry Pi, connect the display to Raspberry Pi, Connect the camera to Raspberry Pi correctly.

2. Open the terminal and run

sudo raspi-config

3. Choose the Interface--Enable Camera , enter it , then it the Raspberry Pi will restart automatically ( if not , you can restart it by yourself)

Open the terminal again , run

raspistill –t 5000 –o test.jpg

then the camera will be on.The “5000”means the camera will open 5 seconds , the “test” is the name of picture , you can change them as your need.

 

 
 

Use case

TB2_WRSmrZnBKNjSZFhXXc.oXXa_!!2566773369

 

 

4098539092_1310794308

 

 

 
 
 
With LED Light Package Included :
 
1 x Night Vision Camera 
 
2 x IR lights
 
1 x 15 cm Raspberry Pi 3 Camera Cable
 
( not include Raspberry Pi )

160-7_

 

NoT LED Light Package Included :
 
1 x Night Vision Camera 
 
1 x 15 cm Raspberry Pi 3 Camera Cable
( not include Raspberry Pi )160-2_