New X820 V3.0 USB 3.0 SATA HDD/SSD Storage Expansion Board + Case For Raspberry Pi 3 B+
New X820 V3.0 USB 3.0 SATA HDD/SSD Storage Expansion Board + Case For Raspberry Pi 3 B+ image 1
New X820 V3.0 USB 3.0 SATA HDD/SSD Storage Expansion Board + Case For Raspberry Pi 3 B+ image 2
New X820 V3.0 USB 3.0 SATA HDD/SSD Storage Expansion Board + Case For Raspberry Pi 3 B+ image 3
New X820 V3.0 USB 3.0 SATA HDD/SSD Storage Expansion Board + Case For Raspberry Pi 3 B+ image 4
New X820 V3.0 USB 3.0 SATA HDD/SSD Storage Expansion Board + Case For Raspberry Pi 3 B+ image 5

New X820 V3.0 USB 3.0 SATA HDD/SSD Storage Expansion Board + Case For Raspberry Pi 3 B+

US $49.48 -10%

US $44.98

Updated to V3.0 version,Support Raspberry pi 3 B+

V3.0 Upgrade Features

  • Using patch process to improve the quality of the X820 V3.0 Board;
  • Add Powers button switch on the board to control the power supply.
  • Add upgraded external 5V 2A power output USB port for external device such as cellphone and other device, of course. User can power the raspberry pi via this USB port when GPIO pins are occupied by other expansion board.
  • Use upgrade Main control chip to solve the problem that the 'reboot' command is not supported in the V1.3 function.
  • User can directly use the X820 V3.0 board as a mobile hard disk even if you don't power it (tested; with our USB3.0 cable or use a good quality and relatively short USB3.0 cable); PS: In the V1.3 version, you need to power the X820 at the same time as when you use the X820 V1.3 board as a mobile Hard disk;
  • The HDMI adapter has been removed, which reduces the difficulty of installation; it also facilitates the design and installation of the accessory enclosure;
  • Two kinds of power supply modes are supported; One of mode is that power the raspberry pi via 2 pin cable by connecting to GPIO2 (5V) and GPIO3(GND) pins, the other one of mode is power the raspberry pi via USB port; PS: DON'T USE THE TWO KIND MODES AT THE SAME TIME;

Overview

  • The X820 expansion board provides a complete storage solution for raspberry pi, only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X820 Board;
  • For Use With: Raspberry Pi 3 Model B/ 2B / B+
  • Upgraded to USB3.1 Gen1 port; (SupportS USB 3.0) w/ high quality USB 3.0 Cable ( Lenght- 80cm/2.62inch; Diameter- 5.96mm/0.19inch)
  • Operating System: All Raspberry Pi operating systems

Features

  • Supports upto 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD)
  • Ideal storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
  • USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac
  • External Self Powered - Do not require power from Raspberry Pi USB port
  • Powers the Raspberry Pi - no additional power supply for RPi
  • Duplicated Raspberry Pi HDMI port

Specification

  • Power supply: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output
  • DC Power Plug Size : 5.5*2.5mm
  • Output Ports: 1 x HDMI, 1 x USB , 1 x DC jack
  • Size of the case: 12.3x9.2x5.7mm,Weight: 420g

Notice

  • DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET!

Packing List

  • 1 x X820 Expansion Board
  • 1 x Metal Case for X820 Board
  • 1 x USB 3.0 cable (Length: 80cm/ 2.62 inch)
  • 1 x USB connector
  • 1 x 2 Pin Power Connection Wire(Cable: 10cm)
  • 1 x Install Screws pack
  • 1 x 5V 4A power adapter( option, not include if not buy power adapter)