Raspberry Pi 3 B 5MP Camera module IR-CUT 175 Degree Focal Adjustable Length Night Vision NoIR Camera module for Raspberry Pi 3
Raspberry Pi 3 B 5MP Camera module IR-CUT 175 Degree Focal Adjustable Length Night Vision NoIR Camera module for Raspberry Pi 3 image 1
Raspberry Pi 3 B 5MP Camera module IR-CUT 175 Degree Focal Adjustable Length Night Vision NoIR Camera module for Raspberry Pi 3 image 2
Raspberry Pi 3 B 5MP Camera module IR-CUT 175 Degree Focal Adjustable Length Night Vision NoIR Camera module for Raspberry Pi 3 image 3
Raspberry Pi 3 B 5MP Camera module IR-CUT 175 Degree Focal Adjustable Length Night Vision NoIR Camera module for Raspberry Pi 3 image 4
Raspberry Pi 3 B 5MP Camera module IR-CUT 175 Degree Focal Adjustable Length Night Vision NoIR Camera module for Raspberry Pi 3 image 5

Raspberry Pi 3 B 5MP Camera module IR-CUT 175 Degree Focal Adjustable Length Night Vision NoIR Camera module for Raspberry Pi 3

US $15.84 -10%

US $14.4

Raspberry Pi 3 B+ IR-CUT Camera Night Vision Focal Adjustable 5MP Fish Eye Automatically Switch Day-Night for RPI 3 Modl B+

Use case

HTB1CzbMPhTpK1RjSZFMq6zG_VXae

 

Introduction :

The Raspberry Pi IR-CUT Camera is the day and night camera , automatic turn the mode by identify the intensity of light.
You can get the best imaging whatever it is in the daytime or in dark.
It's a built-in IR-CUT camera, can be used during the day and night , together with the 175 degree fish eye widr angle lens , it is suitable for surveillance camera , webcam and other use .

Note: the 175 degree is a physical theoretical value , not the same with value measured by protractor.

 

 

 

Feature :

1. Raspberry Pi Camera, supports all revisions of the Raspberry Pi. ( support Raspberry Pi 3 Model B+ )


2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight


3. Comes with infrared LED, supports night vision


4. 5 megapixel OV5647 sensor


5. Camera specifications


6. CCD size: 1 / 4inch


7. Aperture (F): 1.8


8. Focal Length: 3.6mm adjustable


9. Field of View ( Physical ): 175 degree


10. Sensor best resolution: 1080p


11. 4 screw holes to fix the IR lights or holder.


12. Used for attachment


13. Provides 3.3V power output


14. Supports connecting infrared LED and / or fill flash LED


15. Dimension: 31 mm × 32 mm

 

With LED Light Package Included :
  • 1 x Night Vision Camera 
  • 2 x IR lights
  • 1 x 15 cm Raspberry Pi 3 Camera Cable
( not include Raspberry Pi )

HTB1XvSpPyrpK1RjSZFhq6xSdXXai

Not LED Light Package Included :

  • 1 x Night Vision Camera 
  • 1 x 15 cm Raspberry Pi 3 Camera Cable
( not include Raspberry Pi )

HTB1MbakPCzqK1RjSZFLq6An2XXau

Using steps:

1.Please ensure the raspberry Pi system is the newer version, and open the camera function.Type the command: sudo raspi - config and check the camera function of the fifth.The picture below:
 

HTB1twGaPrvpK1RjSZPiq6zmwXXaG

2. Then select: Enable

HTB1C2WfPwHqK1RjSZFEq6AGMXXaR

3. Then the system return to the interface itself. Choose the “Finish “ , it will restart:

HTB1twGaPrvpK1RjSZPiq6zmwXXaG

4. After the raspberry pi system restart , you can use raspberry pi camera now.

If you want to take photo, you can run the command : raspistill

For example,input: raspistill –t 2000  -o 1.jpg
-t: ( the time of waiting to take the photo ,5000 is five seconds). – o 1.jpg (1.jpg is command of file)

Tip:

Hardware connection:
1. Soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
2. Remove the protective film before using the lens
3. bare boards, pay attention to ESD damage, guard against static electricity!